SERVICES

Quick Reference


  • The Basics of HVAC Installation
  • HVAC Unit Size
  • Heat Pump vs Straight Cool or Package Unit
  • Ductwork
  • Thermostats and Controls
  • HVAC Installation Costs
  • The Right HVAC Contractor
  • Scaffolding Rental Basis
  • Scaffolding On Rental Basis
The Basics of HVAC Installation

First of all, let’s start with the most basic question someone could have around an HVAC installation… What does HVAC stand for?
The acronym “HVAC” stands for heating, ventilation and air conditioning.

Central HVAC systems include a variety of components and equipment, all of which must be installed properly to work in perfect synchronization. Failure to follow industry standards during HVAC installation can result in poor performance, higher energy bills, and a shorter service life.

HVAC Unit Size

Whether it’s a straight cool system, a package unit, or a heat pump that provides both heating and cooling, nothing is more important to a successful installation than getting the system size right. An oversized unit not only costs more to purchase, but will warm or cool your home so quickly that it will cycle off before household air has had time to return to the equipment for re-conditioning. This can cause the air to feel musty, sticky or clammy and can create uncomfortable warm or cold spots in your home and bottom-line reduce the efficiency of your HVAC unit.

Undersized systems simply don’t have enough power to get the job done efficiently. A too-small system will need to run longer to achieve ideal temperatures, which can result in a costly repair and premature replacement. HVAC systems are sized according to the amount of heating and cooling that they generate. A reputable HVAC technician will conduct a load calculation that considers factors like your home’s construction, size, design layout and orientation in order to establish the correct system size.

Heat Pump vs Straight Cool or Package Unit

The difference between a heat pump, a straight cool, and a package unit, is a heat pump unit goes into reverse to cool. Heat Pumps are great in all climates, but can be tricky in extreme cold if they’re not properly installed. They can overheat easily, causing the system to go into a bypass mode and temporarily stop heating the house. To prevent this, electric heat strips are installed in the system as a secondary source, so the heat pump doesn’t have to work so hard. 

Package units are a little more simplistic and have a faster installation time. A package unit, is the whole “package” because it heats, cools, and circulates air from a single rooftop unit. These are most popular for commercial buildings. 

Straight Cool Split Systems are the most common for residential homes. The condenser, furnace, and coil are all separate components that work together to regulate the temperature. The condensers will most commonly be located on the ground, unless the house was specially designed to keep the condensers out of sight on the roof. These systems work efficiently to keep houses at just the right temperature.

Ductwork

Forced-air heating and cooling systems rely on a branching network of air ducts to circulate conditioned air throughout your home. For optimal performance, the return and supply channel or duct must be carefully installed and balanced. Over time, poorly designed or improperly maintained ductwork can develop leaks and gaps that impair efficiency and produce poor air quality. According to the Environmental Protection Agency (EPA), up to 20 percent of the air that travels through ductwork in the average home is lost to leakage.

Sealing and insulating ducts eliminates leaks and improves energy efficiency. In order not to disrupt the balance between supply and return ducts, however, it’s best to leave the task in the hands of qualified HVAC technicians. Improper sealing can actually worsen system efficiency.

Thermostats and Controls

Thermostats are connected to sensors on HVAC equipment that signal the system to turn off or on according to the thermostat’s temperature setting readings. For proper operation, both the thermostat and the indoor HVAC equipment should be installed in a draft-free location away from air ducts.

Programmable thermostats allow you to preset different temperatures for different times of the day. If you are looking for energy efficiency by scheduling your HVAC system to adjust temperatures while you’re away from home or asleep at night, you can reduce your energy expenses by 10 percent or more, according to the EPA. Some advanced models let you control settings from your computer or smart device.

Today’s high efficiency furnaces and air conditioners come with features like variable-speed blowers that automatically adjust to the changing heating and cooling demands of your residential or commercial HVAC. Instead of constant off-and-on operation, they execute a consistent delivery of warmed or cooled air while conserving energy at the same time.

HVAC Installation Costs
Factors that Affect your HVAC Installation Costs:

Factoring the cost of a new unit, breaks down to many things. It’s not just as simple as picking out a unit and having someone install it. Technicians look to see if the house is up to city code to be able to perform an installation, considers additional electrical needs, and checks to see if the duct work is in usable condition. Along with the ductwork inspection, technicians will also calculate to see if a second return will be needed. A new unit is no good if it continues to break down after being starved for air. 

There are other factors to think about as well, such as, will a crane be needed, do the condensate lines need to be replaced, are there obstructions in the backyard or on the room that the installation team would have to move or work around? While it’s easy to think that a simple quote shouldn’t be so pricey, there’s actually a lot more to it. 

The Right HVAC Contractor

In addition to ensuring that an HVAC system is installed properly, it’s important to verify that you can trust the technicians who enter your home as well.

At The Cooling Company, each of our technicians undergoes a background check and extensive training to ensure that only the most qualified and trusted technicians install HVAC systems.

To learn more about the wide variety of HVAC products available today or to schedule an installation, contact us to speak to one of our experts today.

Scaffolding Rental Basis

Scaffolders Put Up And Take Down Scaffolding That Allows Workers To Reach The Higher Levels Of Buildings During Construction, Cleaning And Renovation Projects.

You Might Use Scaffolding Methods To Put Up Temporary Spectator Stands, Stages Or Gantries At Public Events. You Could Also Build The Scaffold Around The Formwork And Shuttering That Holds Setting Concrete In Place On Large Structures Like Bridges (known As Falsework).

Scaffolding Is Mainly An Outdoor Job That Involves Working In Most Weather Conditions. The Work Can Be Physically Demanding, With A Lot Of Climbing And Lifting Of Heavy Equipment.

In This Job You Would Need To Be Able To Follow Instructions Accurately. You Would Need A Good Sense Of Balance. You Would Also Need To Be Physically Fit And Have Good Hand-eye Coordination.

To Get Into This Job You Would Usually Start Out As A Trainee And Gain Qualifications On The Job. You May Be Able To Get Into This Job Through An Apprenticeship Scheme.

Much Of Your Work Will Be At Heights, And You Would Wear A Safety Helmet, Protective Footwear And A Safety Harness.

You Would Travel From Site To Site, And Some Projects May Involve Overnight Stays Away From Home.

Scaffolding On Rental Basis

We N.A groups is progressive steel and MS fabricator with also providing scaffoldings for rent located in Bangalore, India. Under the efficient guidance of Mr. K.Vijaykumar, we have reached the summit of success within a short time. We handle projects from concept of execution through the fabrication and erection of the structural steel, stairs, railings, joists, residential steel frames, commercial steel frames, erection and dis-mantling of scaffoldings for any area and much more.

We made a slow beginning with the minimum infrastructure in capital requirements it was our dedication that made us a known entity in this sphere of operation in the market. We also have modern machinery and a team of talented designers, technicians and other workers who work hard to fabricate best quality process equipment. We design and produce a wide variety of product according to customer’s specifications and requirements, apart from standard orders we also take pride to undertake bulk orders and believe in delivering the orders timely.




About Us

We offer installations, inspections, maintenance, refurbishing and safety training courses for experienced and rookie operators.

Important Links

About Us

Services

Blog

Contact Us

M.V.Engineering all rights reserved Designed by Wincent Technologies